SLU 25B
Wall-mounted thermostatic mixer, water supply span 150 mm, 9 V
Characteristics
- economical aerator, rate of flow 6 l/min
- hygienic flush
- suitable for medical facilities
- swivel faucet
- is destined for cold and hot water, temperature is regulated by thermostatic mixer
- safety fuse against scalding
- stop flowing of hot water till 1 s in case of cold water failure
- pressure of hot and cold water must be same
- water is flowing as long as hands are in the active range
- water stops flowing after removal of hands from the active range of sensor after adjustable time delay (can be set in range 0,25 – 7,75 s)
- function of automatic water stop after 5 minut of continuous flow
- monitoring of battery capacity
- START/STOP program
- parameter adjustment using by the remote control SLD 03
- Order number: 03255
I am interested in more information:
Supply specification
SLU 25B - Supply No. 03255 - faucet with a spout, electronics, thermostat and electromagnetic valve, rosette (2 pcs.), chrome cover (2 pcs.), filter (2 pcs.), Allen key, lithium battery SLA 09
Technical information
Material: | chrome |
Temperature regulation: | with thermostat |
Power supply: | battery operated |
Control: | infra-red |
SLU 25B: | water inlet spacing 150 mm |
Operating voltage: | 9 V |
Battery life: | lithium 9 V, type U9VL (approx. 2 years (100 uses per day) |
Active range: | standard 0,25 - 0,35 m, START/STOP program 0,05 - 0,15 m |
Recommended flow pressure: | 0,1 - 0,6 MPa |
Rate of flow: | 6 l/min. (inf. data) |
Water inlet: | male thread G 1/2“ |
Downloads
- Mounting instructions (1.67 MB)
- Catalogue list (199.66 kB)
- 2D Drawing (205.79 kB)
Accessories
Related Products
The display of the products on the website is for information only. The producer reserves the right to make technical changes or parameters. The producer makes every effort to keep the information published here as up-to-date as possible, but does not guarantee that all data is accurate and current at the time.