SLKN 18A
Bathroom floor drain assembled near by the wall, 850 mm, polished
Characteristics
DRAIN
- collar serves for a tight and reliable connection to hydro-isolation
- collar with the frame sealed up against the moisture
- mounting legs with M10 screws for better seating of the drain to the floor (horizontal position)
- 2 pcs. of waterproofing tapes for fixation to base, including screws and wall plugs
- low installation height
- side bends for better stability
- bond screw for connection with bonding conductor
- lenghts 750, 850, 950, 1150 mm
- different lenghts could be made to order (till 1200 mm - depression to the waste, over 1200 mm - decline to the waste)
- load class K3 (till 300 kg)
- material AISI-304
WASTE OUTLET
- plastic siphon DN 50 mm
- according to the norm DIN EN 274; rate of flow 42 l/min
- possibility od adjustment of the direction and the slope of the drain
- different siphon positions could be made to order
GRID
- material AISI - 304
- six basic grid designs of polished and brushed finish
- other designs could be made to order
| Order number | 69181 |
| Code | SLKN 18A |
Supply specification
SLKN 18A - Supply No. 69181 - drain, grid, siphon, mounting legs with M10 screw (4 pcs.), tool for grid remove, waterproofing tape, mounting set
Contact
SANELA spol. s r.o.
Dukelských hrdinů 989
563 01 Lanškroun
Czech Republic
Tel.: +420 465 350 770-6
Fax: +420 465 350 780
E-mail: sanela@sanela.cz
